306 matches for the search term(s) "retrofit kits benchpro workbenches"

The adjustable height roll holders attach directly to the uprights on workbenches from BenchPro. The tubular design and anti-slide lock pins are designed for effortless roll changing under the heaviest of loads. Attaches to Uprights Strong Tubular Roll ...

Articulating shelves mount to an upright on BenchPro workbenches. They can be slid vertically with an adjustable angle, rotation, position, and height.Product Notes and Features 12" Wide by 11" Deep Other sizes are available 20 Lb. Capacity ...

Lower bin shelves for BenchPro workbenches are made from a strong 16-guage, all factory welded construction. They are available for many common workbench sizes. Strong 16-Gauge Construction All Factory Welded Height: 6" Length: VariesContact us ...

Top bin shelves for BenchPro workbenches are made from a strong 16-guage, all factory welded construction. They attach directly to the uprights and are available for many common workbench sizes. Strong 16-Gauge Construction All Factory Welded Attaches ...

Bin Box Rails attach directly to the uprights on BenchPro workbenches. The reinforced welded design won't twist under the heaviest of loads. Reinforced Welded Design Won't Twist Under Heaviest Loads Snaps onto Uprights Vertically AdjustableConstruction ...

Modesty panels are made of 18-gauge steel and custom sized to fit BenchPro Workbenches. A custom hole punch puts the right size/shape holes where you need them for no additional charge.Available Punch Sizes and ShapesRound1/8, 3/16, 1/4, 5/16, 3/8, 1, ...

These steel pegboards are custom made to fit between the uprights on BenchPro workbenches. It is made of solid heavy-duty 18-gauge steel and the holes are 1" apart and 14 rows in height. Solid Heavy 18-Gauge Steel Holes Spaced 1" Apart Shipped ...

This wire management plate for the underside of BenchPro workbenches is made of a solid 18 gauge painted steel. Cables and wires can be inserted from the right, left, back, or the preinstalled rubber grommets on the bottom. Solid 18 Gauge Painted Steel ...

Articulating tool holders are made from heavy-duty welded steel construction (12 gauge) that are easy to install and slide vertically on the upright of a BenchPro workbench. 12 Ga. Steel 12" L x 6" W x 3" H Easy to Install Slides Vertical ...

The articulating document holders are adjustable up and down, side to side, backwards and forwards, and with angles/tilts. They attach directly to the upright on BenchPro Workbenches. It is 24" wide and 12" high. Up/Down Side + Side Back + ...

45º Single Light Frame for BenchPro Workbenches, 36"

These 90º Double Frames for Light Fixtures are meant to provide lights for both surfaces of back to back workbenches from BenchPro.   Slides Easily Over the Uprights Adjust Front to Back Fully Adjustable Height Use for Back to Back BenchesContact ...

These 45º Double Frames for Light Fixtures are meant to provide lights for both surfaces of back to back workbenches from BenchPro.  Slides Easily Over the Uprights Fully Adjustable Height Use for Back to Back BenchesContact us with any questions ...

Overhead cabinets featuring double sliding doors made specifically for workbenches from BenchPro. Both doors are lockable and the heavy-duty stainless steel handles match the stainless on drawer fronts, power strips, and workbench detail. Sliding the ...

These cabinets are mountable underneath a drawer (drawers sold seperately). They are 12" high by 20" deep and a variety of widths. The internal divider shelf extends 2/3 of the way to the front. It is piano hinged, locakable, and has a heavy-duty ...

Edge Rails are factory installed edges that are needed to keep parts from falling off the workbench. They sit 0.5 inches above the work surface and are crafted from .060" thick steel (stainless steel for ESD applications). Powder Painted To Match ...

This desktop grommet is perfect for desk and work surfaces where a clean appearance is important. The removable face accommodates plugs up to 1-1/2". Industry Standard Removable Face Accepts Most Plugs. Up-to 1-1/2" Color: Black (Also available ...

This 90º Single Frame for Light Fixtures is meant to provide light above the work surface of a single BenchPro workbench. It slides easily over the uprights and the lights are adjustable forward, back, up, and down. Slides Easily Over the Uprights ...

This 45º Single Frame for Light Fixtures is meant to provide light above the work surface of a single BenchPro workbench. It slides easily over the uprights and offers fully adjustable height. Slides Easily Over the Uprights Fully Adjustable HeightConstruction ...